Penrite Dot4 Brake Fluid 0.5L for Ford Econovan Escape Explorer F100 150 250 350

Suit Vehicle:

FORD Econovan Maxi 4x4, 2.0 Litre Eng. (1986-1988)
FORD Econovan, 1.4/ 1.6 Litre Engs. (1979-1985)
FORD Econovan/ Maxi, 1.8/ 2.0 Litre Engs. (1984-1999)
Ford Econovan/ Maxi, 2.2 Litre Diesel (1981-1997)
FORD Escape, 2.3 Litre Eng., Automatic, 4WD (2004-2006)
FORD Explorer UN/ UQ, 4X4, 4.0 Litre V6 Eng. (1996-1999)
Ford Explorer US, 4X4, 4.0 Litre V6 Eng. (2000-2001)
Ford Explorer UT/ UX/ UZ, 4x4, 4.0 Litre V6 Eng. (2001-2005)
Ford Explorer UT/ UX/ UZ, 4x4, 4.6 Litre V8 Eng., Auto. (2001-2006)
FORD F100 4x4, 4.1 Litre Eng. (1979-1980)
Ford F100 4x4, 4.1 Litre Eng. (1981-1985)
Ford F100 4x4, 5.0 Litre V8 Eng. (1985-1987)
Ford F100 4x4, 5.8 Litre V8 Eng. (1981-1985)
FORD F100, 4.1 Litre Eng. (1982-1985)
Ford F100, 5.0 Litre V8 Eng. (1985-1987)
Ford F100, 5.8 Litre V8 Eng. (1982-1985)
FORD F150 4x4, 5.0 Litre V8 Eng. (1987)
Ford F150 4x4, 5.0 Litre V8 Eng. (1988-1989)
Ford F150 4x4, 5.8 Litre V8 Eng., ZF Manual/ C6 Auto. (1990-1992)
FORD F150, 5.0 Litre V8 Eng. (1987)
Ford F150, 5.0 Litre V8 Eng. (1988-1989)
Ford F150, 5.8 Litre V8 Eng., ZF Manual/ C6 Automatic (1990-1992)
FORD F250, 4.1 Litre Eng. (1982-1985)
Ford F250, 5.8 Litre V8 Eng. (1982-1985)
FORD F350 4x4, 4.1 Litre Eng. (1982-1985)
Ford F350 4x4, 5.0 Litre V8 Eng. (1986-1988)
Ford F350 4x4, 5.8 Litre V8 Eng. (1982-1985)
FORD F350, 4.1 Litre Eng. (1982-1985)
Ford F350, 5.8 Litre V8 Eng. (1982-1985)

Feature

SUPER DOT 4 Brake Fluid is a premium quality, non-silicone, non-Mineral/petroleum based, fully Synthetic brake fluid designed for use in a wide range of brake and Clutch applications

Application

SUPER DOT 4 BRAKE FLUID is recommended for re-Fill or top-up of brake and clutch systems in passenger cars, 4WD's, motorcycles, light and Heavy Duty commercial vehicles, mining, construction and agricultural equipment that require a non petroleum based DOT 3, DOT 4 or Super DOT 4 brake & clutch Hydraulic fluid.

SUPER DOT 4 BRAKE FLUID is suitable for use where the vehicle manufacturer specifies DOT 3 or DOT 4 brake fluid.

SUPER DOT 4 BRAKE FLUID should be changed according to the manufacturers service specifications.

SUPER DOT 4 BRAKE FLUID can be used for first fill or refilling a brake or clutch system. For best results, the system should always be flushed with Penrite Brake Fluid SUPER DOT 4 prior to first fill or before refilling the system.

Please Note

Do not Mix this product with SILICONE DOT 5 or MINERAL type brake fluids.
For vehicles that require mineral based products i.e. Citroen, Penrite LHM Plus should be used.
Not mixable with Silicone type assembly compounds
Avoid contact with skin, varnish & paint. If skin contact occurs wash with water.

Caution

Brake Fluids are naturally hygroscopic and will absorb water from the air. This will lower the effectiveness of the product. After opening bottle, ensure cap is resealed tightly to avoid water contamination.

SUPER DOT 4 BRAKE FLUID is a possible solution to:Clutch Slave Cylinder