PHC HD Clutch Kit for Chevrolet El Camino Impala Malibu Monte Carlo 265x10Tx29.0

Calculate Shipping

Local Pickup - $0.00
Pickup from Sydney Warehouse

Australia Post-Eparcel - $0.00
Australia Post Parcel Post

Australia Express Post - $0.00

Description

Contents : PHC Heavy Duty Clutch Kit

Clutch Kit Includes :
Heavy duty cover assembly with 20% (typical) increase in torque capacity / clamp load
Clutch plate
Release bearing

More Information :
Feature & Benefit 1 : Heavy Duty Clutch Kit Suits OE Flywheel
Feature & Benefit 2 : Typical 20% Increase in Torque Capacity
Feature & Benefit 3 : 1 Year / 20,000KM Warranty

Tech Spec :
Weight [KG] : 7.564
Package Length [CM] : 33.5
Package Width [CM] : 33
Package Height [CM] : 11
Clutch Plate Dimensions : 265 x 10T x 29.0
Dual Mass Flywheel : Not Included
Solid Flywheel : Not Included
Concentric Slave Cylinder : Not Included
Torque Capacity : Peak: 745Nm, Rated: 596Nm
Spigot : RSB590
Alignment Tool : CAT186

Suit Vehicle : Chevrolet El Camino Impala Malibu Monte Carlo 265x10Tx29.0

Features

Note: eBay's compatibility table is not accurate in some cases. Please refer to the following information we have provided for you.

Suit Vehicle:

Vehicle Make	Model Name	Series	Engine	Year
Chevrolet	El Camino	1/64-12/68	327ci, V8	1964 - 1968
Chevrolet	El Camino	1/69-12/78	350ci, V8	1969 - 1978
Chevrolet	El Camino	1/71-12/73	307ci, V8	1971 - 1973
Chevrolet	El Camino	1/78-12/82	3.8 Ltr, V6	1978 - 1982
Chevrolet	El Camino	1/79-12/79	3.3 Ltr, V6	1979 - 1979
Chevrolet	El Camino	1/79-12/81	305ci, V8	1979 - 1981
Chevrolet	Impala	1/59-12/62	235ci, 6 Cyl	1959 - 1962
Chevrolet	Impala	1/62-12/64	409ci, V8	1962 - 1964
Chevrolet	Impala	1/66-12/67	283ci, V8	1966 - 1967
Chevrolet	Impala	1/68-12/69	327ci, V8	1968 - 1969
Chevrolet	Impala	1/69-12/72	350ci, V8	1969 - 1972
Chevrolet	Malibu	1/64-12/67	327ci, V8	1964 - 1967
Chevrolet	Malibu	1/73-12/80	350ci, V8	1973 - 1980
Chevrolet	Malibu	1/78-12/81	3.8 Ltr, V6	1978 - 1981
Chevrolet	Malibu	1/79-12/79	3.3 Ltr, V6	1979 - 1979
Chevrolet	Malibu	1/79-12/80	267ci, V8	1979 - 1980
Chevrolet	Malibu	1/79-12/81	305ci, V8	1979 - 1981
Chevrolet	Malibu	4 Speed, 1/64-12/67	283ci, V8	1964 - 1967
Chevrolet	Malibu	4 Speed, 1/73-12/73	307ci, V8	1973 - 1973
Chevrolet	Monte Carlo	1/71-12/77	350ci, V8	1971 - 1977
Chevrolet	Monte Carlo	1/79-12/79	3.3 Ltr, V6	1979 - 1979
Chevrolet	Monte Carlo	1/79-12/80	267ci, V8	1979 - 1980
Chevrolet	Monte Carlo	1/79-12/81	3.8 Ltr, V6	1979 - 1981
Chevrolet	Monte Carlo	1/79-12/81	305ci, V8	1979 - 1981

1.PHC Heavy Duty Clutch Kit

Designed and manufactured to replace the clutch system installed as Original Equipment, a Heavy Duty replacement clutch kit features a torque capacity increase due to a higher clamp load. Each component has been thoroughly tested and developed for a specific application. This range provides a Quality Assured replacement part that will meet or exceed the requirements of the original unit.

2.Product Feature

PHC Heavy Duty Clutch Kits are manufactured with a typical 20% increase in clamp load, resulting in an equivalent increase in torque capacity. Increasing clamp load by more than 20% can put the vehicles hydraulic system under stress, significantly reduce clutch system life and result in very high clutch pedal actuation effort.

3.About PHC

After 60 years of experience in developing and manufacturing clutch kits for OEM and Aftermarket use, we are a trusted source for a complete range of Clutch Kits suited to your vehicle.