PHC HD Sprung Cushioned Clutch Kit for Holden Kingswood HZ WB One Tonner HZ WB

Calculate Shipping

Local Pickup - $0.00
Pickup from Sydney Warehouse

Australia Post-Eparcel - $0.00
Australia Post Parcel Post

Australia Express Post - $0.00

Description

Contents : PHC Heavy Duty Clutch Kit

Clutch Kit Include :
Heavy duty cover assembly with 20% (typical) increase in torque capacity / clamp load
Upgraded sprung cushioned cerametallic clutch plate with high torque capacity friction material (Suitable for mix of street and motorsport use reduced friction point will result in more sudden clutch engagement)
Release bearing

Clutch Material : Street Sprung Cushioned Cerametallic

Parameter :
Clutch Plate Dimensions:255 x 10T x 29.0

Suit : Holden Kingswood HZ WB One Tonner HZ WB

Features

Note: eBay's compatibility table is not accurate in some cases. Please refer to the following information we have provided for you.

Suit :

Make	Model/Submodel	Engine	Series	Output	Trans	Notes	Year
Holden	Kingswood HZ	4.2 Ltr	V8	120kw	3 Speed	Pull Type Fork	10/1977-12/1979
Holden	Kingswood HZ	4.2 Ltr	V8	120kw	4 Speed	Pull Type Fork	10/1977-12/1979
Holden	Kingswood HZ	4.2 Ltr	V8	87kw	3 Speed	Pull Type Fork	10/1977-12/1979
Holden	Kingswood HZ	4.2 Ltr	V8	87kw	4 Speed	Pull Type Fork	10/1977-12/1979
Holden	Kingswood HZ	5.0 Ltr	V8	114kw	4 Speed	Pull Type Fork	10/1977-12/1979
Holden	Kingswood HZ	5.0 Ltr	V8	161kw	4 Speed	Pull Type Fork	10/1977-12/1979
Holden	Kingswood WB	4.2 Ltr	V8		3 Speed	1 Tonne	04/1980-12/1984
Holden	Kingswood WB	4.2 Ltr	V8		4 Speed	1 Tonne	04/1980-12/1984
Holden	One Tonner HZ	4.2 Ltr	V8	120kw	4 Speed	1 Tonne	10/1977-04/1980
Holden	One Tonner HZ	5.0 Ltr	V8	161kw	4 Speed	1 Tonne	10/1977-04/1980
Holden	One Tonner WB	4.2 Ltr	V8		3 Speed	1 Tonne	04/1980-12/1984
Holden	One Tonner WB	4.2 Ltr	V8		4 Speed	1 Tonne	04/1980-12/1984

1.PHC Heavy Duty Clutch Kit

Designed and manufactured to replace the clutch system installed as Original Equipment, a Heavy Duty replacement clutch kit features a torque capacity increase due to a higher clamp load. Each component has been thoroughly tested and developed for a specific application. This range provides a Quality Assured replacement part that will meet or exceed the requirements of the original unit.

2.Product Feature

PHC Heavy Duty Clutch Kits are manufactured with a typical 20% increase in clamp load, resulting in an equivalent increase in torque capacity. Increasing clamp load by more than 20% can put the vehicles hydraulic system under stress, significantly reduce clutch system life and result in very high clutch pedal actuation effort.

3.About PHC

After 60 years of experience in developing and manufacturing clutch kits for OEM and Aftermarket use, we are a trusted source for a complete range of Clutch Kits suited to your vehicle.